CAS BI-100D - Sealing & Optional Drawing

Sealing bolt
Sealing wire
Sealing lead
Sealing plate
SEALING
Perform the sealing as shown in the below figure after the calibration is
completed.
Open the top cover.
Cover CAL switch in the left top of cover with sealing plate and
screw 2 sealing bolt.
Connect the sealing wire as follows and compress the sealing lead.
OPTIONAL DRAWING
60
61
3 5
2.5
4.5
50
50
89
94
WALL MOUNT
FIXED BRACKET
INDICATOR GUDE BRACKET
FIXED BRACKET
26