CAS BI-100D - Indicator Diagnostic Test Functions

TEST FUNCTION
Moving method
Open the top cover of indicator and power on with pressing CAL switch in
the left top. At that time, LCD screen shows “ZERO=TEST TARE=CAL”
message and pressing ‘Zero’ key moves to Test 1.
Test menu (tESt 1 ~ tESt 4)
TEST 1: Liquid crystal display test
TEST 2: A/D conversion test
TEST 3: Key test
TEST 4: RS-232C communication test
TEST 1(Enter ‘TEST’ mode to start TEST 1.)
Function : LCD TEST
Used key LCD screen Description
ENTER key :
Press once: Test running
Press one more time:
Next menu
Display TEST 1 state.
kg
lb
pcs
HI
OK
LO
B A T
Used key LCD screen Description
ENTER key :
Press once: Test running
Press one more time:
Next menu
Display TEST 2 state.
Display the digital value
corresponding to current weight.
Used key LCD screen Description
ENTER key :
Press once: Test running
Press one more time:
Next menu
Display TEST 3 state.
Pressing the key to test shows
the key code.
TEST 2
Function : A/D conversion test
TEST 3
Function : Key test
21