15
CONVERSION MODE
Enter method
If you press the * key for three seconds to normal operation state,
after display SET message for one second and then enter
F-1 menu.
Key using
: Increase the set point.
: Move to the next menu.
: Return to the normal operation at completion of setting.
Conversion menu (F01-F02)
F-1: Auto power OFF setting
F-2: RS-232C communication setting
F-1: Auto power OFF setting
Auto power OFF function is used to spare the battery by means
of power off when this scale is not used.
Set point Meaning
Auto power OFF is not used.
Automatically power off when the weight is not changed or no key is
used for 5 min.
F-1 0
F-1 1
F-2: RS-232C communication setting(option)
Set point Meaning
No transmit.
Transmit at both stable and unstable weight.
Transmit at stable weight.
Transmit at data request. (Data request signal D )
F-2 0
F-2 1
F-2 2
F-3 3
RS-232C communication (option)
Port connection method
Connect the computer serial port with RS-232C port in the back panel of
indicator as follows to communicate with computer.
ENTER
To Next Page
Loading...
