CAS BI-100D - Count Mode Error Troubleshooting; Weighing and Count Mode Errors

Err 27
Cause
Zero value is too low.
Management
Check that the platform is empty.
Err 28
Cause
The weight trembles.
Management
Check that the loadcell connector is properly connected.
Errors in count mode
Err 61
Cause
The count unit weight and sample weight are set too high.
Management
Set the count unit weight low or the sample quantity high.
Err 62
Cause
The count unit weight and sample weight are set too low.
Management
Set the count unit weight high or the count sample quantity low.
29