CAS SW-1S Series - Changing Unit of Weight; Hold Function (SW-1 S Only)

3. Changing Unit of Weight (kg, lb, oz)
Press the key first. Holding it, press the key in the simple weighing
mode. The display shows the "UnIt" shortly and then you may select
kg, lb, or
oz as the unit of weight.
4. Hold Function (SW-1S only)
When the weight is unstable,
press the key.
Display will show the
"HOLD" for a few seconds.
Then the display will
show the average weight.
kg
kg
Remove the commodity
from the platter, or press
key again to exit from
"HOLD" mode.
kg
9
Remove container and
commodity, then the display
will show the weight of the
container with "-" symbol.
Press the key, then
display will show the
"0.000".
kg kg
859306-15-20 en ma 2012-07