14
ERROR MESSAGE
An error of the initial zero range
Problems on Analog Module
Overload on the platter
Unstable conditions of scale
Set the platter empty.
Try to turn OFF and ON the scale.
Call your CAS dealer if still problems.
Remove it from the platter
Do not put somthing exceeding maximum
capacity on the platter
Make the scale stable conditions
ERROR REASONS SOLUTIONS
Err
Init
OFL
UNStA
BATTERY MAINTENACE
LOW BATTERY WARNING
When the battery is low the display shows the "BAT" sign.
You can replace the battery new one.
If you still use the scale without replacing the battery the scale may provide
incorrect result on measurement.
859306-15-20 en ma 2012-07
To Next Page
Loading...
Need help?
General
