1. Simple Weighing Mode
Place a commodity on
the platter.
Remove the commodity
from the platter.
2. Weighing with Tare
TARE means the weight of container being used for a commodity.
TARE key function is to subtract the weight of the container from full weight loaded.
kg
kg
Place a container on
the platter.
Press the key.
Place a commodity into the
container, then the display
will show only the weight of
the commodity.
kg
kg
kg
8
OPERATIONS
Turn on the display by pressing key. Then, the display will show all the
segments and count up "0" to "9". You may stop this automatic counting by
pressing the key.
When you turn on the display, make sure that platter is empty. Otherwise,
display will show "Err", an error of initial zero range. Please refer to
"ERROR MESSAGE" section for more information on page 14.
When the weight becomes stable the display shows the stable sign ( ) on.
You may need to make it "0.000" by pressing key unless the display
indicate "0.000" under the empty platter.
859306-15-20 en ma 2012-07
To Next Page
Loading...
Need help?
General
