11
If you want to go back to the
simple weighing mode just
press key twice.
Suppose that the HIGH limit and
LOW limit are set up as 2.990kg
and 1,990kg respectively. If the
weight loaded is 2kg between
HIGH and LOW limit the display
shows "OK" and the scale
continues to beep slowly.
If the weight loaded is above
2.990kg, HIGH limit, the scale
continues to beep rapidly.
6. Counting Function (SW-1C only)
Counting without Tare
Initial display as above.
Press key twice to go
to sample unit selection
mode.
Press key to select the
number of sample unit. You
can select 10, 20, 30, 40,
50,60, 70, 80, 90, 100, 200,
300,400, or 500 as a sample
unit.
859306-15-20 en ma 2012-07
To Next Page
Loading...
Need help?
General
