7
KEY FUNCTIONS
SW-1C
Used to set the zero point.
Used to input or cancel the weight of tare.
Used to make the weight of commodity stable. This weight is
average value.
Used to turn on and off the scale.
KEYS FUNCTIONS
KEY FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Used to change the unit of weight, and shown as following sequence
on the display. [Kg] [WL on or off] [PCS] [Kg]
Used to turn on and off the scale.
KEYS FUNCTIONS
859306-15-20 en ma 2012-07
To Next Page
Loading...
Need help?
General
