Cascade F Series - Specifications; Hydraulics; Auxiliary Valve Functions

PECIFICATIONS
S
28
208743 Rev. 1
GA0073.eps
6.1-1 Hydraulics
6.1-2 Auxiliary Valve Functions
Truck Relief Setting
Minimum – 2300 psi (160) bar
Maximum – 2600 psi (180) bar
Hydraulic Oil
Cascade attachments are compatible with SAE 10W
petroleum base oil per Mil. Spec. MIL-0-5606 or
MIL-0-2104B.
Use of synthetic or aqueous base hydraulic oil is not
recommended. Contact Cascade if fire resistant
hydraulic oil must be used.
B
D
C
A
GA0005.eps
Tilt back
Hoist up
Hoist down
Tilt forward
FORK POSITIONER WITH
SOLENOID VALVE
A Sideshift Left
A Forks Out (press knob button)
B Sideshift Right
B Forks In (press knob button)
FP0016.eps
A
B
A
A
B
B
FORK POSITIONER WITH
STANDARD VALVE
A Sideshift Left
B Sideshift Right
C Forks Out
D Forks In
FP0016.eps
A
B
C
C
D
D
FP0016.eps
B
FORK POSITIONER WITH
SEQUENCE VALVE
A Sideshift Left – Forks Out
B Sideshift Right – Forks In
A
A
A
B
B
Truck Flow Volume
55F 100F/120F
Minimum 3 GPM (11 L/min.) 4 GPM (15 L/min.)
Recommended 4 GPM (15 L/min.) 5 GPM (19 L/min.)
Maximum 5 GPM (19 L/min.) 6 GPM (23 L/min.)