Case IH 91 Series - Install Fittings in the Smartrax Valve

Chapter 3
10 Case IH 91xx, 92xx and 93xx Series SmarTrax™ Installation Manual
Install Fittings in the SmarTrax Valve
Before mounting the SmarTrax valve (P/N 334-0003-089) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
FIGURE 1. Fittings Installed in the SmarTrax Valve
Fitting Part Number Port
Fitting - -6 JIC (M) to -6 SAE O-Ring (M) Straight Adapter 333-0012-045
LSPV, LS
STEER
Fitting - -8 JIC (M) to -8 SAE O-Ring (M) Straight Adapter 333-0012-093 P,T
Fitting - -8 JIC (M) to -10 SAE O-Ring (M) Straight Adapter 333-0012-056 A,B
Transducer - 0-3000 PSI Pressure 422-0000-086 PS