4 - INSTRUMENTS/CONTROLS
41
OPERATING CONTROLS
Propulsion Control Lever
The propulsion control lever is used to control the direction of travel and the ground speed of the
Combine.
NEUTRAL POSITION - The neutral position is
located in the center of the propulsion control lever
slot. Moving the propulsion control lever toward the
neutral position decreases the ground travel speed.
Moving the propulsion control lever into the neutral
position will stop all ground travel. The propulsion
control lever must also be in the NEUTRAL position
to start the engine.
FORWARD TRAVEL - Move the propulsion control
lever forward from the NEUTRAL position to start
forward ground travel. Moving the propulsion control
lever farther forward in the slot increases the forward
travel speed.
.
REVERSE TRAVEL - Move the propulsion control
lever toward the right and then rearward from the
neutral position to start reverse ground travel. Moving
the propulsion lever farther rearward in the slot
increases the reverse travel speed.
1
2
3
A24307
1
RR05E001
2
RR05E002
3
To Next Page
Loading...
