Case 446 - Page 28

The travel control lever automatically returns to neutral when the brake is applied. The
travel
control lever can be moved from the neutral position with the brake applied.
A neutral
start switch is actuated by the travel control lever. The lever must be in the
neutral position to start the engine.
6. BRAKE
PEDAL
TO BRAKE: Depress brake pedal fully.
This
action will return the travel control lever to neutral and bring tractor to an
abrupt stop .
NOTE: This
method of stopping should be avoided.
Use this method for emergency stopping only.
The tractor should be brought to a smooth stop by slowly returning the travel
control lever to neutral.
Depress brake pedal fully if positioning the travel control lever in neutral does
not bring the tractor to a stop.
See Operating Procedure Section of this manual for more complete discussion of stop-
ping travel.
FIGURE 11
- 15 -