WX210 - WX240 SAFETY INSTRUCTIONS 0 - 11
Using grab handles and steps
Falls are one of the main causes of
injury.
- Always face the machine when
entering or leaving it, and use
only the aids provided, e.g. steps
and handrails.
- Never use operating elements as
grab handles.
- Never jump down from the ma-
chine.
- Never climb up onto or down from
a moving machine.
- Watch for slippery platforms,
steps and handles when leaving
the machine.
Fig. 3
Adjusting the operator’s seat
A seat that is poorly adjusted with
respect to the operator or the work-
ing conditions may result in prema-
ture operator fatigue and thus in
faulty operation.
- The seat must be adjusted with
any change of machine operator.
- The operator must be able to de-
press the pedals completely and
move the control levers effort-
lessly with his back resting
against the backrest.
If that is not possible, move the
seat forward or back and check the
setting again.
Consult the relevant section in the
Owner’s Manual.
Fig. 4
Î
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
To Next Page
Loading...
