Case WX210 - Heat Build-Up Safety

0 - 34 SAFETY INSTRUCTIONS WX210 - WX240
Preventing heat build-up close to pressure
systems
Preventing heat build-up in lines carrying
combustible fluids
Heat generation close to pressur-
ized fluid lines may result in a
highly flammable spray, putting
you and other persons in the im-
mediate vicinity at risk of serious
scalding.
Never carry out heat-generating
welding or soldering work close to
pressurized fluid lines or other
highly flammable substances, and
never use a flame cutter there.
Pressure lines may be inadver-
tently cut if the heat goes beyond
the immediate flame area. To pro-
vide temporary protection for
hoses or other materials, mount
fire-resistant shields when carrying
out welding or soldering work.
- Never carry out welding or flame-
cutting work on pipes or lines car-
rying combustible fluids.
- Flush them out with a non-flam-
mable solution before welding or
flame-cutting them.
Fig. 38
Î
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)