0 - 12 SAFETY INSTRUCTIONS WX210 - WX240
Applying the safety belt
If the machine overturns, the opera-
tor may be injured and/or thrown
out of the cab. He may be severely
injured or even crushed to death by
the overturning machine.
- Before operating the machine,
check the belt fabric, the closure
and the fastening components
carefully. If one of the parts is
damaged or worn, replace the
safety belt or the components be-
fore starting up the machine.
- Always remain seated and keep
the safety belt fastened while op-
erating the machine. This will help
minimize the risk of injury in the
event of an accident.
The safety belt must be replaced
after any serious accident even if it
appears to be undamaged.
Fig. 5
Working from the operator’s seat only
Starting up the engine incorrectly
may cause the machine to make
unexpected movements that might
lead to severe, even fatal, injury.
- Always start up the engine from
the operator’s seat only.
- Never start the engine by short-
circuiting the starter.
- After starting up the engine, check
that all driving levers, driving
pedals and control levers are in
neutral position.
Never take passengers on the machine
Passengers on the machine may
suffer injury e.g. from foreign bod-
ies or through being thrown off.
- Only the operator is allowed onto
the machine. Never take passen-
gers.
- Passengers also obstruct the op-
erator’s view so that the machine
is no longer safely operated.
Fig. 6
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
To Next Page
Loading...
