Case WX210 - Parking and Moving Machine Safety

WX210 - WX240 SAFETY INSTRUCTIONS 0 - 19
Parking the machine safely Preventing accidents when the machine is
moving
To prevent accidents:
- Park on a flat, horizontal surface.
- Turn the brake switch to braking
position.
- Set the working equipment down
on the ground.
- Lower the levelling blade and/or
the outrigger claws onto the
ground.
- Engage the superstructure lock.
- Run the engine unloaded at mini-
mum speed for ca. 5 minutes.
- Turn the ignition key to OFF posi-
tion to switch off the engine. Then
withdraw the key.
- Move the steering safety lever to
block the machine.
- Lock the windows, the sliding roof
and the cab door.
- Lock all covers and flaps.
Severe or fatal accidents may result
from an attempt to enter or leave a
moving machine.
- Before leaving the operator’s seat,
select a flat, horizontal area for
parking if possible.
- Park the machine safely.
- Block both wheels and set the
working equipment down on the
ground.
- Park at a reasonable distance
from other vehicles.
Fig. 18
Confirming the direction of machine travel
Inadvertent activation of the operat-
ing pedal may result in severe
damage or fatal accidents.
Check the machine position. Read
the corresponding section in the
Owner’s Manual.
Î
Fig. 17
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)