Casio 3569 - World Time; Checking World Time; Setting the World Time City; Swapping Your Home City Time and World Time

World Time
World Time lets you look up the current time
in any of 48 cities (31 time zones) around the
globe.
Checking World Time
1. Enter the World Time Mode.
l
Navigating Between Modes
Entering the World Time Mode displays
the city code of the currently selected
World Time city.
●
Each press of (B) or (D) scrolls through
city codes.
●
For information about city codes, see
the information below.
l
City Table
City code
Setting the World Time City
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
1. Enter the World Time Mode.
l
Navigating Between Modes
2. Use (B) and (D) to display the city you want
to specify as a World Time City.
●
Holding down (B) or (D) scrolls through
settings at high speed.
●
For information about city codes, see
the information below.
l
City Table
City code
3. If you want to configure the summer time
setting, hold down (A) for at least two
seconds.
[DST] is displayed along with summer
time.
●
Each time you hold down (A) for at least
two seconds, the setting toggles
between standard time and summer
time.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
The summer time setting you configure
is applied to the currently selected city
only. It does not affect other cities.
Swapping Your Home City
Time and World Time
In the World Time mode, press (A) and (B) at
the same time to swap your Home City time
with your World Time.
For example, if your Home City is Tokyo and
the World Time City is New York, they will be
swapped as shown below.
After swappingBefore swapping
World Time City
(Tokyo)
World Time City
(New York)
Watch Operation Guide 3569
10