Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
●
Watch Features
●
Multi Time
In the Timekeeping Mode, you can switch
between four different cities and view the
current time in each (T-1: Time 1 through
T-4: Time 4).
●
World Time
World Time displays the current time in any
of 31 time zones around the globe.
●
Alarm
An alarm sounds whenever a time specified
by you is reached.
●
Stopwatch
You can use the stopwatch to measure up
to 24 hours of elapsed time in units of 1/100
of a second.
●
Timer
Countdown from a start time specified by
you. An alarm sounds when the countdown
reaches zero.
Note
●
The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
General Guide
A Day of the week
B Month, day
C Hour, minute, second
A button
Holding down this button for at least one
second in any mode displays the setting
screen.
B button
Pressing this button while any setting screen
is displayed will change the setting.
C button
Each press cycles between watch modes.
D button
Pressing this button while any setting screen
is displayed will change the setting.
L button
Press to turn on illumination.
Indicators
A Displayed during p.m. times while 12-hour
timekeeping is being used.
B Displayed while the button operation tone
is disabled.
C Displayed while an alarm is turned on.
D Displayed while the hourly time signal is
enabled.
E Displayed while Auto Light is enabled.
F Displayed while the watch is indicating
summer time.
Watch Operation Guide 3569
5
To Next Page
Loading...
