E-65
■ The current time setting is off by hours.
Your Home City setting may be wrong. Check your Home City setting and correct it, if
necessary (page E-34).
■ The current time setting is off by one hour.
If you are using the watch in an area where time calibration signal reception is
possible, see “To confi gure Home City settings” (page E-34).
If you are using in the watch in an area where time calibration signal reception is
not possible, you may need to change your Home City’s STD (standard time)/DST
(daylight saving time) setting manually. Use the procedure under “To toggle the Home
City time between standard time and daylight saving time” (page E-36) to change the
STD (standard time)/DST (daylight saving time) setting.
■ The hands and/or day indications are off.
This could indicate that the watch has been exposed to magnetism or strong impact,
which has caused problems with proper hand and day alignment. Adjust the watch’s
hand and day home position alignment (page E-59).
To Next Page
Loading...
Need help?
General
