19990401
u To store a program file into the storage area
1. On the initial MEMORY Mode screen press 1(PROG).
• This displays a list of program files that are in the current area.*
1
2. Select the program file you want to store.
•Use the cursor f and c keys to highlight the name of the program file you want to
store, and then press 1(SEL).
3. Press 5(SAVE).
The message “Complete!” appears when the store operation is finished.
Press i to return to the screen displayed in step 1.
A “Memory ERROR” occurs and the store operation is terminated if the storage area
becomes full.
The following message appears if there is already a program file in the storage area with the
same name as the program file you are trying to save.
Press w(Yes) to save the new program file, or i(No) to cancel the save operation.
10-8-2
MEMORY Mode
*
1
The screen appears as shown below if there
are no program files in the current area when
you start the save operation.
To Next Page
Loading...
Need help?
General
