EN-122
You can use the procedures in this section to record your keyboard play for later playback.
There are two ways to record: Easy Recording, which simplifies recording of your performances, and
Multi-track Recording, which lets you overdub record performances.
Your recordings can be saved to Song Bank locations 361 through 368 (Tone Recordings: 361,
Rhythm Recording: 362, Auto-Off Recording: 363: Multi-track Recording: 364 to 368).
■ Easy Recording
For Easy Recording, you can specify Tone Recording, Rhythm Recording, or Part-off Recording.
• You can use the tone screen to save a recorded performance as a Tone Recording.
• You can use the rhythm screen to save a recorded performance as a Rhythm Recording.
• Built-in songs, user songs, and performances that Part Off record a USB flash drive song are stored
as Part-off Recordings.
■ Multi-track Recording
A Multi-track Recording consists of a single system track to which a performance that uses layer, split,
and rhythm function can be recorded, and five solo tracks for recording with the UPPER1 part.
• There is memory for up to five multi-track recordings.
Also, you can copy a Tone Recording and Rhythm Recording as a Multi-track Recording (page
EN-129).
■ Recorded Information
The recorder records information about the operations of the functions listed below.
– Keyboard play and pedal operations
– Tone
– Touch Response
– Pedal
– Sustain
– Layer
– Split
– Balance
– Octave shift
– System Effects (Reverb*
1
, Chorus
*2
)
– Scale Tuning
*3
– Tempo
*3
– Rhythm
*4
– Recording settings beat
*1 Can be recorded with part-off. Cannot be recorded to the solo track.
*2 Cannot be recorded with part-off. Cannot be recorded to the solo track.
*3 Cannot be recorded to the solo track.
*4 Cannot be used the function with part-off. Cannot be recorded to the solo track.
• The Multi-track Recording solo track does not record UPPER2 part and LOWER part operations.
Recording Your Keyboard Play
To Next Page
Loading...
