Configuring Settings
EN-147
Setting Item List
Function Name Description Display Name Setting
Transpose Can be used to raise the overall
pitch in semitone steps to make
it easier to play a piece written in
a difficult key, or to adjust to a
key that better matches a
vocalist, another musical
instrument, etc.
Transpose –12 to 0 to +12
(Initial Default: 0)
Touch off velocity Can be used to specify the
velocity value when Touch
Response is disabled.
Touch Off
Velocity
1 to 127
(Initial Default: 100)
Keyboard Lighting Can be used to disable and
enable Keyboard Lighting.
Key Light Off, On (Initial
Default: On)
MIC Reverb Can be used to adjust the depth
of the reverb applied to the
microphone input sound.
However, you cannot adjust
reverb while using the karaoke
function.
MIC Reverb 0 to 127 (Initial
Default: 40)
Split point Can be used to change the
range of the lower keyboard
and/or the accompaniment
keyboard.
Split Point C2 to C7
(Initial Default: F{3)
Rhythm auto setting Can be used to disable
automatic setting of the tempo
and pattern when a rhythm is
selected.
Rhythm Auto Set Off, On
(Initial Default: On)
Chord fingering mode Can be used to specify the
chord fingering mode.
Chord Mode CASIO Chord,
Fingered 1,
Fingered 2,
Fingered on Bass,
Fingered Assist,
Full Range Chord
(Initial Default:
Fingered 1)
Rhythm Controller Type Can be used to change the
control method of rhythm
patterns and fill-ins.
Rhythm
Controller Type
Type 1, Type 2
(Initial Default:
Type 1)
Rhythm volume level Can be used to adjust the
rhythm volume level.
Rhythm Volume 0 to 127
(Initial Default: 115)
Song volume level Can be used to adjust the song
volume level.
Song Volume 0 to 127
(Initial Default: 127)
Lesson Fingering Voice
Guide
Can be used to disable
Fingering Voice Guide during
lessons.
Fingering Voice
Guide
Off, On (Initial
Default: On)
To Next Page
Loading...
