Recording Your Keyboard Play
EN-125
1.
Press TONE or RHYTHM.
2.
Rotate the dial to select a tone or rhythm.
3.
Press RECORD.
This displays “(REC)” and enters record standby.
4.
Long-press RECORD.
This displays a record settings screen.
5.
Rotate the dial to change the beat value.
• For the beat setting, you can select Off, or a value of 1 to 16.
• After you rotate the dial once to select a value, you can change the value further using – and +.
• To go back to the previous screen, press BACK.
6.
To exit the setting operation, press BACK.
Changing the Beat Setting for Recording
To Next Page
Loading...
