Playing on the Keyboard
EN-31
You can use the procedure below to configure a setting that sounds a chime on the first beat of each
measure, and a click for the remaining beats.
• Available settings are Off, or a value of 1 to 16 beats.
1.
Press HOME.
This displays the Home Screen.
2.
Press METRONOME.
This displays the metronome screen.
3.
Rotate the dial to change the beat value.
• After you rotate the dial once to select a value, you can change the value further using – and +.
• Selecting “Off” disables the chime. Use this setting when you want to practice without worrying
about the first beat of each measure.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
Specifying the Metronome Beats Per Measure
To Next Page
Loading...
