- 21 -
7-4. Switch status test
Press "C" button or changing the switch condition,the switch status is appeared on the
transaction place of the display. The clerk key switch condition is showen at the 6 and 7 digit
number's place of display. For the clerk button model, the pressed LED will light on.
[DISPLAY]
ROM cassette condition
Off : Not mounted
On : Mounted
Paper near end sensor
Off : Normal (Paper end switch OFF)
On : Near end (Paper and switch ON)
Menu switch conditon (Only for TK6000,TK7000 and TK-T500)
0 : Switchs are both off condition.
1 : Menu 1
2 : Menu 2
Allways off
Journal head sensor
Off : Head down
ON : Head up
Drawer sensor
Off : Drawer close
On : Drawer open
Mode switch status
0 : No connetion
1 : PGM
2 : RF
3 : REG1
4 : REG2
5 : X
6 : Z
7 : XZ2
8 : OFF
Clerk key condition (Germany)
00 : Not inserted key
01 to 16 : Clerk key number
Receipt head sensor
Off : Head down
ON : Head up
Journal paper sensor
Off : Paper in
ON : Paper out
Receipt paper sensor
Off : Paper in
ON : Paper out