- 30 -
NOTE: When use the command ptrint and display, press #1 key (Cash AMT tender key)
to display and print the next line. To stop this test, press any key or set the mode
switch to OFF position.
[PRINT] [DISPLAY]
15) Time and date display test
The machine will display the time .
By #2 Key, the display will change the date and time.
Opeartion : 9 #2 Key
[PRINT] [DISPLAY]
Press #2 key to change the display.
16) Date time set test
The machine will set the time or the date.
Opeartion : n1 n2 n3 n4 n5 n6 X 9 #2 Key
X: 0= Time set (n1 n2: Time, n3 n4: Minute, n5 n6: Second)
1= Date set (n1 n2: Year, N3 n4: Month, n5 n6: Day)
[PRINT] [DISPLAY]
# 14000009
17) IPL flash pack down load test
This operation will store the application software in the flash 1 to the flash pack by IPL
format. The flash pack is cleared the all data inside it. And the flash pach format partition
is made onlu one area and it is made only one FCB file of IPL.
To Next Page
Loading...
Need help?
General
