75
Appendix B: Command Tables
Command 4 - CONVERSION EQUATION SETUP
!1 Notes on inputting constants for polynomials
Polynomial: Input constants in sequence, from n = 0 to 9. Input 0 for constants that are not used.
Mixed polynomial: Input constants in sequence from m = 4 to 1, and n = 0 to 4. Input 0 for constants that
are not used. Input of zero for constants can be skipped if all remaining constants are not used.
Equation Number Equation Type Units Display Constants
* 0 Clears all equations. * 0 Clears equation selected by the equation number parameter. * 0 None
1 Equation 1 (Channel 1) 1 Polynomial 1 °F (Fahrenheit) Specifies the constants
2 Equation 2 (Channel 2) 2 Mixed polynomial 2 °C (Celsius) used by the conversion
3 Equation 3 (Channel 3) 3 Power 3 K (Kelvin) equation
4 Equation 4 (SONIC channel) 4 Modified power
5 Logarithmic
6 Modified logarithmic
7 Exponential
8 Modified exponential
9 Geometric
10 Modified geometric
11 Reciprocal logarithmic
12 Steinhart-Hart
To Next Page
Loading...
