20070201
Perform the following key operations from the statistical data list.
3 (TEST)
1 (Z)
1 (1-S)
The following shows the meaning of each item in the case of list data specifi cation.
Data .............................. data type
μ
.................................. population mean value test conditions (“G
μ
0 ” specifi es
two-tail test, “<
μ
0 ” specifi es lower one-tail test, “>
μ
0 ”
specifi es upper one-tail test.)
μ
0 ................................. assumed population mean
σ
.................................. population standard deviation (
σ
> 0)
List ................................ list whose contents you want to use as data (List 1 to 26)
Freq .............................. frequency (1 or List 1 to 26)
Save Res ...................... list for storage of calculation results (None or List 1 to 26)
Execute ........................ executes a calculation or draws a graph
The following shows the meaning of parameter data specifi cation items that are different
from list data specifi cation.
¯ x .................................. mean of sample
n .................................. size of sample (positive integer)
After setting all the parameters, use c to move the highlighting to “Execute” and then press
one of the function keys shown below to perform the calculation or draw the graph.
• 1 (CALC) ... Performs the calculation.
• 6 (DRAW) ... Draws the graph.
6-5-3
Te s ts
To Next Page
Loading...
