20070201
9-4-6
Inputting and Editing Cell Data
k Referencing a Particular Cell
The following procedure shows how to reference A1 (which contains the value 3) and
perform the calculation A1 × 2.
u To reference a particular cell
1. Move the cell cursor to cell A2, and then input
! . (=).
2. Press 1 (GRAB).
• This enters the Grab mode, which changes
the function menu to the function described
below. The Grab mode function menu
makes it easier to move the cursor around
the spreadsheet.
To move the cell cursor to here: Press this key:
A specifi c cell
2 (GO)
Line 1 of current column
3 (TOP ↑ )
Column A of current line
4 (TOP ← )
Bottom line of current column
5 (BOT ↓ )
Column Z of current line
6 (BOT → )
3. Press f to move the cell cursor to cell A1.
4. Press 1 (SET).
• This inputs the reference to cell A1.
# Instead of using the GRAB command
(1 (GRAB) in step 2), you could also type in
the necessary letter and number manually, if
you want. In place of steps 2 through 4 in the
above procedure, you could input av (A)b
to type “A1” if you want. For more information, see
“Formula Input Example” (page 9-4-4).
To Next Page
Loading...
