20070201
9-4-7
Inputting and Editing Cell Data
5. Next, input *c .
6. Press w to store the formula.
Result of A1 × 2
k Referencing a Range of Cells
You can reference a range of cells to obtain their sum, mean, etc.
The following procedure input a formula to determine the sum of cells A6 through B7, and
inputs the result in cell A4. This procedure assumes that cells A6 through B7 already contain
the values shown below.
A B
6 1 2
7 3 4
u To reference a range of cells
1. Move the cell cursor to cell A4, and then input ! . (=).
2. Perform the following key operation to input the sum command.
5 (CEL)5 (Sum)
• “CellSum(’’ is a S
•
SHT mode command. See “9-5 S
•
SHT Mode Commands” for more
information.
3. Press J1 (GRAB).
• This enters the Grab mode.
4. Use the cursor keys to move the cell cursor to the
fi rst cell of the range you want to select (A6 in this
example).
To Next Page
Loading...
