20070201
k Error Checks During Data Copy
The following error checks are performed while a data copy operation is being executed.
Low battery check
The calculator performs low battery check before starting the data copy operation. If the
battery is at Level 1, a low battery error occurs and the copy operation is not performed.
Available memory check
The calculator checks to see if there is enough free memory available to store the copied
data.
A “Memory Full” error occurs if there is not enough memory available.
A “Too Many Data” error occurs when the number of data items is too great.
A “Fragmentation ERROR” occurs when there is enough free memory available, but a
garbage collection operation is required.
If a “Fragmentation ERROR” occurs, perform the optimization procedure (page 12-7-16).
Overwrite check
The calculator checks to see if there is any existing data at the copy destination with the
same name as the data being copied.
An overwrite confi rmation message appears if there is data with the same name.
• 1 (Yes) ... overwrites the existing data with the new data
• 6 (No) ... advances to the next data item without copying the data with the same name
• Pressing A will cancel the copy operation and return to the MEMORY mode initial screen.
12-7-9
MEMORY Mode
To Next Page
Loading...
Need help?
General
