Casio DT-940 - Sub-ASSY and Vibration Motor Disassembly

― 16 ―
3.3.5 SUB-ASSY DISASSEMBLY/ASSEMBLY
Procedures
(1) Remove two C screws (+, silver).
(2)
Hold up SUB-ASSY and disconnect FFC-CABLE from the connector (single point).
(3) Detach SUB-ASSY.
* For the assembly, reverse the above order.
(1) C Screws
(2) Disconnect FFC-CABLE from the con-
nector (indicated in a circle) positioned
under SUB-ASSY after releasing the
lock upward.
CUSHION-CN-S
FFC-SUB-PY050
Battery Side Connector Side
3.3.6 BUZZER DISASSEMBLY/ASSEMBLY
Procedures
(1) Remove two C screws (+, silver).
(2)
Hold up BUZZER-ASSY and remove the connector (single point).
(3) Detach BUZZER-ASSY.
* For the assembly, reverse the above order.
(2)
(1) C Screw
(3) BUZZER-ASSY