Casio DT-940 - Page 42

― 40 ―
Program No. 23
Program Name: Vibrator
NO. Display/Read indicator Operation Remarks/Result
1
< Vibrator >
1.Motor (Auto)
2.Motor (Manual)
ENT. Exit
Press [2], [3] and [ENT] keys in
order with Main Menu displays.
1: The vibrator operates three
times every about 1 second.
2: The vibrator operates
consecutively.
Pressing again stops
operation.
The program conrms On and Off
of vibrator operation.
2
Read indicator: Green
Press [ENT] key. If no error occurs, display returns
to the menu screen.
Program No. 25
Program Name: BT module access
NO. Display/Read indicator Operation Remarks/Result
1
< Bluetooth >
BT module : BC02
CMOS_CS : OK
CMOS_RS : OK
CMOS_SD : OK
CMOS_RD : OK
Press [2], [5] and [ENT] keys in
order with Main Menu displays.
The program executes write, read,
and verify on internal register
toward of Bluetooth module.
This is only the test of circuit
accessibility and no actual
Bluetooth radio transmission is
done.
Please refer to 4.8 Bluetooth check
for Bluetooth radio transmission.
2
If no error occurs, display returns
to the menu screen.