13
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for
power. Never try to use any other type of battery.
1. Open the battery cover.
2. Load the battery.
With the CASIO logo on the
battery facing downwards (in the
direction of the lens), hold the
stopper next to the battery in the
direction indicated by the arrow
as you slide the battery into the
camera. Press the battery in until
the stopper secures it in place.
3. Close the battery cover.
First, charge the battery prior to use.
To load the battery
CASIO logo
Stopper
Battery
OK
NG
To Next Page
Loading...
Need help?
General
