49
Using BEST SHOT
NOTE
• With this “ART SHOT” scene, the flash setting automatically becomes ? (Flash
Off
).
• Movie recording is disabled while “ART SHOT” is selected.
• The ART SHOT cannot be used together with the following features.
Face Detection, CS, Make-up, Color Filter
• The following information applies to the Auto Focus (AF) area (page 57) of some
ART SHOT scenes.
–“O Tracking” is automatically disabled.
–“U Spot” always selected.
With this feature, you can shoot your own self-portrait simply by pointing the camera
at your face.
BEST SHOT has two self-portrait scenes from which to choose.
1. On the BEST SHOT scene menu, select “Self-portrait (1 person)” or
“Self-portrait (2 people)”.
2. Press the shutter button all the way down, and point
the camera at yourself.
About three seconds after you press the shutter button, the
camera will go into Auto Shutter standby and start face
detection. After the camera detects the specified number of
faces, focuses, and adjusts the exposure to the proper
level, it will beep twice and then release the shutter
automatically.
• The camera will emit a shutter sound and the front lamp will flash twice when
the shutter is released.
• To cancel Auto Shutter standby, press [SET].
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you
can record an image by pressing the shutter button all the way down again.
• Shooting with the self-portrait feature may produce a blurred image when shooting
in areas where lighting is dim, which results in a very slow shutter speed setting.
• The Auto Power Off (page 102) trigger time is fixed at five minutes while the
camera is in Auto Shutter standby. Sleep (page 101) is disabled while Auto Shutter
is being used.
Recording a Self-portrait (Self-portrait)
• Self-portrait (1 person): Shoots when the face of at least one person, including
you, is detected.
• Self-portrait (2 people) : Shoots when the faces of at least two people, including
you, are detected.
To Next Page
Loading...
Need help?
General
