Casio Exilim EX-S2 - Playing Back a Voice Recording File (EX-M2 Only)

59
PLAYBACK
1. In the PLAY mode, rock the controller left or
right to scroll through snapshots until the one
to which you want to add audio is displayed.
2. Press MENU.
3. Select the “PLAY”
tab, select “Dubbing”,
and then rock the
controller to the right.
4. Press the shutter release button to start audio
recording.
5. Recording stops after about 30 seconds or
when you press the shutter release button.
Adding Audio to a Snapshot (EX-M2 Only)
The “after-recording” feature lets you add audio to snap-
shots after they are recorded. You can also re-record an au-
dio image (one with a icon on it).
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
• Recording Time:
Up to about 30 seconds per image
• Audio File Size:
Approximately 120KB (30-second recording of approxi-
mately 4KB per second)