102
SHOOTING A MOVIE
To return to the REC mode
After Past Movie recording is complete, the camera stands by
for shooting of another Past Movie.
To exit Past Movie recording, press [BS], select something other
than “Past Movie” and then press [SET]. If you want to set the
camera up for normal snapshot shooting, for example, select
“Auto” and then press [SET].
You can shoot a snapshot while normal movie recording is in
progress. Note, however, that movie recording (image and
audio) is interrupted for a few seconds while the snapshot is
recorded.
■ Shooting a Snapshot During a Movie
1. While movie recording is in progress, press
the shutter button.
You can also half-press the shutter button to focus using
Auto Focus.
2. Movie recording continues after the snapshot
is recorded.
3. To stop movie recording, press [ ].
Shooting a Snapshot while Shooting a
Movie (Snapshot-In-Movie)
To Next Page
Loading...
