87
SHOOTING A SNAPSHOT
The face recognition feature gives priority to the human faces in
an image for focus and brightness settings. The following
describes to two available face recognition modes.
Performing a face recognition recording
operation (Normal Mode)
1.
Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to select “ Face Detection:
Normal” and then press [SET].
Face Recognition
Face
Recognition
Mode
Description
Normal mode
Detects human faces and adjusts focus and
brightness accordingly.
• When multiple faces are detected, image is
given to any relatively large face located in
the center of the image.
Family First
mode
Detects human faces. When multiple faces are
detected, this mode gives setting priority to the
faces of family members whose faces have
been registered using Record Family.
[S] ( )
To Next Page
Loading...
