245
USING THE CAMERA WITH A COMPUTER
Viewing and Storing Images on a
Macintosh
You can view and store images (snapshot and movie files) on
your Macintosh by connecting to the camera.
IMPORTANT!
• Connection is not supported to a Macintosh running Mac
OS 8.6 or lower, or Mac OS X 10.0. Connection is
supported to a Macintosh running Mac OS 9 or OS X (10.1,
10.2, 10.3, 10.4) only. Use the standard USB driver that
comes with the operating system for connection.
■ Connecting the Camera to Your Computer
the First Time
1. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle and then
plug it in to a household power outlet.
• If you do not plan to use the AC adaptor, make sure that
the camera’s battery is fully charged.
To Next Page
Loading...
