145
ADVANCED SETTINGS
Using Key Customize to Assign
Functions [W] and [X]
Key Customize lets you assign any one of the five functions
listed below to the [W] and [X] keys. Once you do, you will be
able to use the assigned functions while shooting snapshots or
movies, without going through the menus. For details about
each of the functions, see the referenced page numbers.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “L/R Key”, and then
press [X].
3. Use [S] and [T] to select the function you
want to assign and then press [SET].
After you assign a function, you can control its setting using
the [W] and [X] keys.
Selecting “Off” leaves the [W] and [X] keys with no function
assigned.
When this function is
assigned:
You can use [W] and [X] to do
this:
Metering (page 136) Change the metering setting
EV Shift (page 131)
Perform EV shifting for
exposure compensation
White Balance (page 132)
Change the white balance
setting
ISO (page 135)
Change the ISO sensitivity
setting
Self-timer (page 79) Select the self-timer time
To Next Page
Loading...
