90
SHOOTING A SNAPSHOT
5. Use [W] and [X] to select a name, and then
press [T].
• You can select any one of 12 preset names to face data.
6. Use [W] and [X] to select the priority level you
want and then press [SET].
• You can select any one of four levels, from “ ”
(Lowest) to “ ” (Highest). Selecting “ ”
(Disabled) will disable face recognition.
Deleting recorded face data
Perform the following steps when you want to delete recorded
face data.
1. Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to select “ Edit Family”
and then press [SET].
4. Press [MENU].
5. Use the procedures under “Deleting a Specific
File” (page 196) and “Deleting All Files” (page
197) to delete the face data you want.
• You can exit this procedure by pressing [MENU].
NOT
• Formatting the camera’s built-in memory (page 209)
deletes all the recorded face data.
To Next Page
Loading...
