99
SHOOTING A MOVIE
6. Use [W] and [X] to select the MOTION PRINT
setting you want and then press [SET].
■ Shooting a Short Movie
1. With the camera pointed at the subject, press
[].
This will shoot a Short Movie of the length you specified and
then stop shooting automatically.
To stop shooting before the specified time is up, press [ ]
again.
IMPORTANT!
• Movie data is continually recorded and stored in a buffer
before you press [ ]. Keep the camera pointed at the
subject. Then at the right moment, press [ ]. When you
press [ ], the remaining recording time of part two of the
Short Movie counts down on the monitor screen.
To do this: Select this setting:
Create a snapshot with nine
movie frames, with the one
recorded when [ ] is
pressed in the center
9 frames
Create a snapshot of the
frame recorded when [ ]
is pressed
1 frame
Turn off MOTION PRINT Off
B
To Next Page
Loading...
