102
Other Settings (Set Up)
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2016, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using some printing application.
• Stamping is performed in accordance with the date and time settings (page 104)
and the display style settings (page 104).
Time Stamping Snapshots (Timestamp)
Date 2016/7/10
Date & Time 2016/7/10 1:25pm
Off No stamping of date and/or time
To Next Page
Loading...
General