82
Establishing a Wireless LAN Connection
Use the procedure below to establish a wireless LAN connection between the camera
and a smartphone for the first time. This operation is required for the first connection
only.
1. On your camera, enter the REC mode and then touch “ ” (Show
Icons).
2. On your camera, touch the “ ” (Remote
Capture) icon.
This will enable connection with a smartphone and the
camera will display a screen for input of an SSID and
password.
3. For the smartphone Wi-Fi setting, input the
camera SSID and password.
When the message “Start up the phone app.” appears on
the camera’s monitor screen, it means that the
smartphone has established a wireless connection with
the camera.
• To break the wireless connection, touch “Cancel”.
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
Configuring Wireless LAN Settings
SSID
password
To Next Page
Loading...
General