18
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-150)
for power. Never try to use any other type of battery.
1. Open the frame (page 13).
2. Open the cover.
While depressing the [OPEN] button, slide
the cover in the direction of arrow
2
in the
nearby illustration.
3. Load the battery.
With the CASIO logo on the battery
upwards, load the battery into the
camera as shown in the illustration.
4. Close the cover.
• Positioning the cover about two millimeters from
the lens unit, keep it parallel with the camera as
you slide it in the direction of arrow
1
and then
arrow
2
to secure it in place.
First, charge the battery prior to use.
Loading the Battery
2
3
1
[OPEN] button
CASIO logo
Battery
OK
NG
2
1
2mm
To Next Page
Loading...
General