83
Establishing a Wireless LAN Connection
This function lets you remotely shoot a snapshot or movie with the camera using a
smartphone. You also can perform remote zoom, self-timer, and other operations as
well.
1. On your camera, enter the REC mode and then touch “ ” (Show
Icons).
2. On your camera, touch the “ ” (Remote Capture) icon.
3. On your smartphone, start up the EXILIM Remote app.
This will establish a connection between the smartphone and your camera.
• About 60 seconds after your camera establishes a connection with the
smartphone, the camera’s monitor screen will go blank and its back lamp will
light green.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 82).
4. Compose the image on your smartphone’s screen as you shoot.
• After you are finished using Remote Capture, touch “Exit” on the camera or exit
the app on your smartphone.
IMPORTANT!
• For snapshots, Premium Auto Pro is automatically selected as the recording mode
while shooting with Remote Capture. You cannot shoot with BEST SHOT or other
recording modes.
• The Movie Quality is always STD (640
x
480) when shooting with Remote Capture.
Using a Smartphone as a Camera Remote Controller
(Remote Capture)
To Next Page
Loading...
General