84
Establishing a Wireless LAN Connection
. Controlling Your Camera with a Smartphone
EXILIM Remote supports the Remote Capture operations listed below. This manual
explains EXILIM Remote operations based on screens that appear using the iPhone
version. Some operations may differ depending on your smartphone type.
Location Information
You can use
8
to add location information to snapshots shot with Remote Capture
when they are sent to a smartphone. On an Android terminal, select
2
“Options” on
the Remote Capture screen. On an iPhone, perform the following operation:
“Settings” * “Privacy” * “Location Services”.
IMPORTANT!
• Enabling location-based services causes the recording date, location information,
and other personally identifiable information to be included in the snapshot data.
Take care when sharing or publishing such images on web services, etc.
1
Exits Remote Capture.
2
Select to configure self-timer and LED light
settings for snapshot shooting.
The Remote Capture self-timer countdown time is
10 seconds (fixed).
3
Displays current LED light settings.
4
Displays what is being picked up by the camera’s
lens.
5
Performs a zoom operation.
6
Toggles between snapshot and movie shooting.
7
Shoot a snapshot or start movie recording.
8
Sends the snapshot that was just recorded to the
smartphone.
9
Displays location information settings.
bk
Displays current self-timer settings.
2
3
6
4
5
bk
7
1
8
9
To Next Page
Loading...
General