144
Using the Camera with a Computer
. To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “¥ SETTING” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
4. Turn off the camera and then
use the USB cable that comes
with the camera to connect it to
your computer.
The camera will turn on
automatically and battery charging
will start (page 18).
• The camera may not turn on
automatically in the case of
certain computer models or
connection conditions. If this
happens, press [ON/OFF]
(Power) to turn on the camera.
• For details about connecting to the camera and precautions when connecting,
see page 18.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
5. Windows 8 users: Click “Desktop” and then “Explorer”.
Windows 7, Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
6. Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
7. Right-click the “DCIM” folder.
8. On the shortcut menu that appears, click “Copy”.
9. Windows 8 users: Click “Documents”.
Windows 7, Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
• If you already have a “DCIM” folder in “Documents” (Windows 8, Windows 7,
Windows Vista) or “My Documents” (Windows XP), the next step will overwrite
it. If you want to keep the existing “DCIM” folder, you need to change its name
or move it to a different location before performing the next step.
USB
USB port
USB cable
B
To Next Page
Loading...
Need help?
General
