Casio fc-83GT CW - Page 103

nPr
0 ≤ n < 1 × 10
10
, 0 ≤ r ≤ n (n, r are integers)
1 ≤ {n!/(n - r)!} < 1 ×
10
100
nCr
0 ≤ n < 1 × 10
10
, 0 ≤ r ≤ n (n, r are integers)
1 ≤ n!/r! < 1 × 10
100
or 1 ≤ n!/(n - r)! < 1 × 10
100
Pol(x, y)
|x|, |y| ≤ 9.999999999 × 10
99
√x
2
+ y
2
≤ 9.999999999 × 10
99
Rec(r, θ)
0 ≤ r ≤ 9.999999999 × 10
99
θ: Same as sinx
a°b’c”
|a|, b, c < 1 × 10
100
; 0 ≤ b, c
The display seconds value is subject to an error
of ±1 at the second decimal place.
a°b’c” = x
0°0’0” ≤ |x| ≤ 9999999°59’59”
A sexagesimal value outside of the above range
is automatically treated as a decimal value.
x
y
x > 0: -1 × 10
100
< ylogx < 100
x = 0: y > 0
x < 0: y = n,
m
2n + 1
(m, n are integers)
However: -1 × 10
100
< ylog |x| < 100
x
√y
y > 0: x ≠ 0, -1 × 10
100
< 1/x logy < 100
y = 0: x > 0
y < 0: x = 2n + 1,
2n + 1
m
(m ≠ 0; m, n are integers)
However: -1 × 10
100
< 1/x log |y| < 100
a
b
/
c
Total of integer, numerator, and denominator
must be 10 digits or less (including separator
symbol).
RanInt#(a, b) a < b; |a|, |b| < 1 × 10
10
; b - a < 1 × 10
10
GCD(a, b) |a|, |b| < 1 × 10
10
(a, b are integers)
LCM(a, b) 0 ≤ a, b < 1 × 10
10
(a, b are integers)
• Precision is basically the same as that described under "Calculation
Range and Precision", above.
102